Home

Acoustic and vibration analyzers, strain-gauge stations

Analyzers are designed to measure the parameters of the spectral components of signals from various sensors. The expanded ZETLab software included with the analyzers can help you do the vast majority of measurement and signal processing tasks. The analyzers output channels are used to control various processes.

AppearanceNameBrief descriptionApplications
ZET 110 Vibrometer, sound level meter, data loggerAnalog input: 1. Frequency ranges: 0...2 kHz in vibrometer mode, 0...20 kHz in sound level meter mode, 0...200 kHz in data recording mode. Dynamic Range 90 dB. You can connect vibration sensors, microphones and ICP-powered pulse sensors. USB 2.0 interface.Stand-alone device for measuring vibration and noise levels. Built-in 2 GB flash memory.
ZET 017-U8 Audio range spectrum analyzer8 or 4 measuring channels. Frequency range: 0...20 kHz. Dynamic Range 90 dB. Built-in ICP amplifier. TEDS Smart Sensor technology. USB 2.0, Ethernet and Wi-Fi interface. Built-in 2 GB flash drive allows you to record independently, without a computer. Up to 25 spectrum analyzers can be connected to a single computer, and the number of channels can be expanded to 200.The spectrum analyzer is designed for vibration tests and is used as a master controller in shaker control systems.
ZET 017-T8 Strain gauge stationAnalog input: 8. Frequency ranges of signals being simultaneously analyzed: 0...20 kHz. Sensor connection in full-bridge, half-bridge and quarter-bridge configurations. USB 2.0, Ethernet and Wi-Fi interface. Built-in 2 GB flash drive allows you to record independently, without a computer.The strain gauge station is intended for tests in standalone mode or with a computer.
ZET 110 Vibrometer, sound level meter, data loggerAnalog input: 1. Frequency ranges: 0...2 kHz in vibrometer mode, 0...20 kHz in sound level meter mode, 0...200 kHz in data recording mode. Dynamic Range 90 dB. You can connect vibration sensors, microphones and ICP-powered pulse sensors. USB 2.0 interface.Stand-alone device for measuring vibration and noise levels. Built-in 2 GB flash memory.
ZET 017-U2 Portable sound range spectrum analyzerAnalog input: 2. Analog output: 1. Frequency range: 0...20 kHz. Dynamic Range 92 dB. Built-in ICP amplifier for connecting vibration sensors and microphones. TEDS Smart Sensor Technology. USB Ethernet. USB or Ethernet powered. USB 2.0, Ethernet, WiFi interface. Built-in 2 GB flash drive allows you to record independently, without a computer.Handheld spectrum analyzer for measurement and diagnosis. Interspectral and correlation analysis.
ZET 210 ADC-DAC boardAnalog input: 16 in-phase / 8 differential. Total conversion requency of 500 kHz. ADC - 16 bits, DAC - 14 bits, Analog output: 2 channels.USB 2.0 Bluetooth
ZET 220 ADC-DAC boardAnalog input: 16 in-phase / 8 differential. Total conversion frequency up to 8 kHz. ADC - 24 bits, DAC - 16 bits, Analog output: 2 channels.USB 2.0 Ethernet 0/100 Wi-Fi
ZET 230 ADC-DAC boardAnalog Input: 4 in-phase / 4 differential. Frequency conversion up to 100 kHz for each channel. ADC - 24 bits, DAC - 24 bit, Analog output: 4 channels.USB 2.0 Ethernet 10/100 Wi-Fi
ZET 302 USB oscilloscopeNumber of input channels: 2. Frequency conversion up to 50 MHz. Effective frequency up to 500 MSPS.USB 2.0
ZET 410 ZET 411 Amplifier for ADCNumber of input channels: 2 differential. Frequency range at amplification factor = 1, 10, 100 up to 100 kHz. Input impedance > 100 kOhm.USB-powered

Send enquiry

Made in Zelenograd

free counters